Axial contact ball bearing ZKLF50115-2RS-2AP
Main dimensions for ZKLF50115-2RS-2AP
| Designation | Dimension | Remark |
|---|---|---|
| d | 50.00 mm | shaft diameter (tolerance: 0 / -0.005 mm) |
| D | 115.00 mm | outer diameter (tolerance: 0 / -0.010 mm) |
| B | 68.00 mm | width (tolerance: -0.25 mm) |
| d1 | 72.00 mm | flange diameter of the inner ring |
| d2 | 8.80 mm | diameter mounting hole |
| J | 94.00 mm | Pitch circle diameter (holes) |
| rmin. | 0.30 mm | min. edge distance |
| r1 min. | 0.60 mm | min. edge distance |
| da min. | 63.00 mm | Minimum diameter shaft shoulder |
| Da max. | 82.00 mm | Maximum diameter shaft shoulder |
| M8x80 (10.9) | 12x Fastening screws DIN EN ISO 4762 (not included) | |
| t1 | 0.20 mm | Position tolerance of the hole in the housing |
| na | 1 | Number of holes in the adjacent construction |
| ta | x30° | Pitch angle of the holes in the adjacent construction |
| b | 3.00 mm | width of the stripping groove |
| I | 59.00 mm | Distance of the extraction groove |
Performance data for ZKLF50115-2RS-2AP
| Designation | Dimension | Remark |
|---|---|---|
| Ca | 76,000 N | dynamic load rating, axial |
| C0a | 250,000 N | static load rating, axial |
| Cu | 14,900 N | fatigue limit load |
| nG Fett | 3,200 min-1 | Limiting speed with greasing |
| nGϑ | 1,500 min-1 | Thermally permissible speed |
| 3 µm | Axial runout (inner ring) | |
| Mm | 10.480 kg * cm2 | Mass moment of inertia |
| MR | 1.350 Nm | Bearing friction torque |
| CkL | 2,250 Nm/mrad | Tilting stiffness |
| CaL | 2,200 N/µm | Axial stiffness |
| 3.720 kg | Weight |
Other sizes of ZKLF50115-2RS-2AP series ZKLF-2RS-2AP (0)
No more data could be loaded.
Variants of ZKLF50115-2RS-2AP (0)
No more data could be loaded.
Alternate brands for ZKLF50115-2RS-2AP (0)
No more data could be loaded.
Product features for ZKLF50115-2RS-2AP (0)
No more data could be loaded.
Für dieses Produkt ist ein 3D-Model verfügbar
Our 3D models serve as visual support and are created with great care and the information is checked for accuracy. However, no liability can be accepted for any incorrect or incomplete information. The release of step files is reserved exclusively for corporate customers. To request a step file, please use the step file request link.
3D WebGL
Step-file
Variants of ZKLF50115-2RS-2AP (0)
No more data could be loaded.
All statements without guarantee. Please note the following product information