Rod end GIR30-DO
Main dimensions for GIR30-DO
| Designation | Dimension | Remark |
|---|---|---|
| d | 30.00 mm | shaft diameter, tolerance: -0.010 mm |
| D | 47.00 mm | outer diameter, bearing |
| B | 22.00 mm | tolerance: -0.120 mm |
| dK | 40.70 mm | Head circle diameter |
| d1 | 34.20 mm | Outer collar diameter of the inner ring |
| d2 | 73.00 mm | Outer eye diameter |
| d3 | M30x2 | Internal thread, right-hand thread |
| d4 | 40.00 mm | Shaft diameter shoulder |
| d5 | 50.00 mm | Shaft diameter shoulder |
| h1 | 110.00 mm | Shaft length, head |
| C1 | 19.00 mm | Width of the rod end |
| ɑ | 6.00 mm | Tilt angle |
| l3 | 56.00 mm | Thread length |
| l4 | 146.50 mm | overall length |
| l5 | 15.00 mm | waistband length of rod end |
| l7 | 37.00 mm | Distance between bore to thread shaft start |
| W | 41.00 mm | width of wrench |
| r1s | 0.60 mm | min. edge distance |
Performance data for GIR30-DO
| Designation | Dimension | Remark |
|---|---|---|
| Cr | 62,000 N | dynamic load rating, radial |
| C0r | 119,000 N | static load rating, radial (Head load capacity) |
| CNmin | 0.04 mm | minimal radial clearance |
| CNmax | 0.10 mm | maximum radial clearance |
| 0.960 kg | Weight |
Other sizes of GIR30-DO series GIRDO (16)
| Designation | Dimension | Performance data | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d | D | B | dK | d1 | d2 | d3 | d4 | d5 | h1 | C1 | ɑ | l3 | l4 | l5 | l7 | W | r1s | Cr | C0r | CNmin | CNmax | |
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ° | mm | mm | mm | mm | mm | mm | N | N | mm | mm | ||
| GIR6-DO | 6,00 -0,008 | 14,00 | 6,00 -0,12 | 10,00 | 8,00 | 21,00 | M6 | 10,00 | 13,00 | 30,00 | 4,40 | 13,00 | 11,00 | 40,50 | 5,00 | 12,00 | 11,00 | 0,30 | 3.400 | 10.200 | 0,02 | 0,07 |
| GIR8-DO | 8,00 -0,008 | 16,00 | 8,00 -0,12 | 13,00 | 10,20 | 24,00 | M8 | 12,50 | 16,00 | 36,00 | 6,00 | 15,00 | 15,00 | 48,00 | 5,00 | 14,00 | 14,00 | 0,30 | 5.500 | 16.000 | 0,02 | 0,07 |
| GIR10-DO | 10,00 -0,008 | 19,00 | 9,00 -0,12 | 16,00 | 13,20 | 29,00 | M10 | 15,00 | 19,00 | 43,00 | 7,00 | 12,00 | 20,00 | 57,50 | 6,50 | 15,00 | 17,00 | 0,30 | 8.150 | 22.000 | 0,02 | 0,07 |
| GIR12-DO | 12,00 -0,008 | 22,00 | 10,00 -0,12 | 18,00 | 14,90 | 34,00 | M12 | 17,50 | 22,00 | 50,00 | 8,00 | 11,00 | 23,00 | 67,00 | 6,50 | 18,00 | 19,00 | 0,30 | 10.800 | 30.400 | 0,02 | 0,07 |
| GIR15-DO | 15,00 -0,008 | 26,00 | 12,00 -0,12 | 22,00 | 18,40 | 40,00 | M14 | 21,00 | 26,00 | 61,00 | 10,00 | 8,00 | 30,00 | 81,00 | 8,00 | 20,00 | 22,00 | 0,30 | 17.000 | 44.800 | 0,03 | 0,08 |
| GIR17-DO | 17,00 -0,008 | 30,00 | 14,00 -0,12 | 25,00 | 20,70 | 46,00 | M16 | 24,00 | 30,00 | 67,00 | 11,00 | 10,00 | 34,00 | 90,00 | 10,00 | 23,00 | 27,00 | 0,30 | 21.200 | 56.500 | 0,03 | 0,08 |
| GIR20-DO | 20,00 -0,010 | 35,00 | 16,00 -0,12 | 29,00 | 24,10 | 53,00 | M20x1,5 | 27,50 | 35,00 | 77,00 | 13,00 | 9,00 | 40,00 | 103,50 | 10,00 | 27,00 | 32,00 | 0,30 | 30.000 | 75.600 | 0,03 | 0,08 |
| GIR25-DO | 25,00 -0,010 | 42,00 | 20,00 -0,12 | 35,50 | 29,30 | 64,00 | M24x2 | 33,50 | 42,00 | 94,00 | 17,00 | 7,00 | 48,00 | 126,00 | 12,00 | 32,00 | 36,00 | 0,60 | 48.000 | 88.200 | 0,04 | 0,10 |
| GIR30-DO | 30,00 -0,010 | 47,00 | 22,00 -0,12 | 40,70 | 34,20 | 73,00 | M30x2 | 40,00 | 50,00 | 110,00 | 19,00 | 6,00 | 56,00 | 146,50 | 15,00 | 37,00 | 41,00 | 0,60 | 62.000 | 119.000 | 0,04 | 0,10 |
| GIR35-DO-2RS | 35,00 -0,012 | 55,00 | 25,00 -0,12 | 47,00 | 39,70 | 82,00 | M36x3 | 47,00 | 58,00 | 125,00 | 21,00 | 6,00 | 60,00 | 166,00 | 15,00 | 42,00 | 50,00 | 0,60 | 80.000 | 159.000 | 0,04 | 0,10 |
| GIR40-DO-2RS | 40,00 -0,012 | 62,00 | 28,00 -0,12 | 53,00 | 45,00 | 92,00 | M39x3 | 52,00 | 65,00 | 142,00 | 23,00 | 7,00 | 65,00 | 188,00 | 18,00 | 48,00 | 55,00 | 0,60 | 100.000 | 194.000 | 0,04 | 0,12 |
| GIR45-DO-2RS | 45,00 -0,012 | 68,00 | 32,00 -0,12 | 60,00 | 50,70 | 102,00 | M42x3 | 58,00 | 70,00 | 145,00 | 27,00 | 7,00 | 65,00 | 196,00 | 20,00 | 52,00 | 60,00 | 0,60 | 127.000 | 259.000 | 0,04 | 0,12 |
| GIR50-DO-2RS | 50,00 -0,012 | 75,00 | 35,00 -0,12 | 66,00 | 55,90 | 112,00 | M45x3 | 62,00 | 75,00 | 160,00 | 30,00 | 6,00 | 68,00 | 216,00 | 20,00 | 60,00 | 65,00 | 0,60 | 156.000 | 313.000 | 0,04 | 0,12 |
| GIR60-DO-2RS | 60,00 -0,015 | 90,00 | 44,00 -0,15 | 80,00 | 66,80 | 135,00 | M52x3 | 70,00 | 88,00 | 175,00 | 38,00 | 6,00 | 70,00 | 242,50 | 20,00 | 75,00 | 75,00 | 1,00 | 245.000 | 485.000 | 0,04 | 0,12 |
| GIR70-DO-2RS | 70,00 -0,015 | 105,00 | 49,00 -0,15 | 92,00 | 77,80 | 160,00 | M56x4 | 80,00 | 98,00 | 200,00 | 42,00 | 6,00 | 80,00 | 280,00 | 20,00 | 87,00 | 85,00 | 1,00 | 315.000 | 564.000 | 0,06 | 0,14 |
| GIR80-DO-2RS | 80,00 -0,015 | 120,00 | 55,00 -0,15 | 105,00 | 89,40 | 180,00 | M64x4 | 95,00 | 110,00 | 230,00 | 47,00 | 6,00 | 85,00 | 320,00 | 25,00 | 100,00 | 100,00 | 1,00 | 400.000 | 689.000 | 0,06 | 0,14 |
Variants of GIR30-DO (2)
| Designation | Dimension | Performance data | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d | D | B | dK | d1 | d2 | d3 | d4 | d5 | h1 | C1 | ɑ | l3 | l4 | l5 | l7 | W | r1s | Cr | C0r | CNmin | CNmax | |
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ° | mm | mm | mm | mm | mm | mm | N | N | mm | mm | ||
| GIL30-DO | 30,00 -0,010 | 47,00 | 22,00 -0,12 | 40,70 | 34,20 | 73,00 | M30x2-LH | 40,00 | 50,00 | 110,00 | 19,00 | 6,00 | 56,00 | 146,50 | 15,00 | 37,00 | 41,00 | 0,60 | 62.000 | 119.000 | 0,04 | 0,10 |
| GIR30-DO | 30,00 -0,010 | 47,00 | 22,00 -0,12 | 40,70 | 34,20 | 73,00 | M30x2 | 40,00 | 50,00 | 110,00 | 19,00 | 6,00 | 56,00 | 146,50 | 15,00 | 37,00 | 41,00 | 0,60 | 62.000 | 119.000 | 0,04 | 0,10 |
Accessories to GIR30-DO (0)
No more data could be loaded.
Product features for GIR30-DO (4)
| Properties | Suffix | Description |
|---|---|---|
| Sliding pair | - | Steel / Steel |
| Maintenance | - | Maintenance required |
| Dimensional standards | - | Dimension series E |
| Dimensional standards | - | Main dimensions according to DIN ISO 12240-4 |
Für dieses Produkt ist ein 3D-Model verfügbar
Our 3D models serve as visual support and are created with great care and the information is checked for accuracy. However, no liability can be accepted for any incorrect or incomplete information. The release of step files is reserved exclusively for corporate customers. To request a step file, please use the step file request link.
3D WebGL
Step-file
All statements without guarantee. Please note the following product information