Rod end GIKL25-PW
Main dimensions for GIKL25-PW
| Designation | Dimension | Remark |
|---|---|---|
| d | 25.00 mm | shaft diameter, tolerance: 0.021 mm, (bore tolerance: H7 (arithmetic mean)) |
| D | 47.00 mm | outer diameter, bearing |
| B | 31.00 mm | tolerance: -0.120 mm |
| dK | 42.85 mm | Head circle diameter |
| d1 | 29.50 mm | Outer collar diameter of the inner ring |
| d2 | 60.00 mm | Outer eye diameter |
| d3 | M24x2-LH | Internal thread, left-hand thread |
| d4 | 33.50 mm | Shaft diameter |
| d5 | 42.00 mm | Shaft diameter |
| h1 | 94.00 mm | Shaft length, head |
| C1 | 22.00 mm | Width of the rod end |
| ɑ | 15.00 mm | Tilt angle |
| l3 | 42.00 mm | Thread length |
| l4 | 124.00 mm | overall length |
| l5 | 12.00 mm | waistband length of rod end |
| l7 | 32.00 mm | Distance between bore to thread shaft start |
| W | 36.00 mm | width of wrench |
| r1s | 0.30 mm | min. edge distance |
Performance data for GIKL25-PW
| Designation | Dimension | Remark |
|---|---|---|
| Cr | 85,000 N | dynamic load rating, radial |
| C0r | 72,800 N | static load rating, radial (Head load capacity) |
| CNmin | 0 mm | minimal radial clearance |
| CNmax | 0.04 mm | maximum radial clearance |
| 0.730 kg | Weight |
Other sizes of GIKL25-PW series GIKLPW (17)
| Designation | Dimension | Performance data | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d | D | B | dK | d1 | d2 | d3 | d4 | d5 | h1 | C1 | ɑ | l3 | l4 | l5 | l7 | W | r1s | Cr | C0r | CNmin | CNmax | |
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ° | mm | mm | mm | mm | mm | mm | N | N | mm | mm | ||
| GIKL5-PW | +0,012 5,00 | 13,00 | 8,00 -0,12 | 11,11 | 7,70 | 18,00 | M5-LH | 8,50 | 11,00 | 27,00 | 6,00 | 13,00 | 10,00 | 36,00 | 4,00 | 10,00 | 9,00 | 0,30 | 6.000 | 9.180 | 0 | 0,04 |
| GIKFL5-PW | +0,012 5,00 | 13,00 | 8,00 -0,12 | 11,11 | 7,70 | 18,00 | M4-LH | 8,50 | 11,00 | 27,00 | 6,00 | 13,00 | 10,00 | 36,00 | 4,00 | 10,00 | 9,00 | 0,30 | 6.000 | 9.180 | 0 | 0,04 |
| GIKL6-PW | +0,012 6,00 | 16,00 | 9,00 -0,12 | 12,70 | 8,90 | 20,00 | M6-LH | 10,00 | 13,00 | 30,00 | 6,75 | 13,00 | 12,00 | 40,00 | 5,00 | 11,00 | 11,00 | 0,30 | 7.650 | 8.000 | 0 | 0,04 |
| GIKL8-PW | +0,015 8,00 | 19,00 | 12,00 -0,12 | 15,88 | 10,30 | 24,00 | M8-LH | 12,50 | 16,00 | 36,00 | 9,00 | 14,00 | 16,00 | 48,00 | 5,00 | 13,00 | 14,00 | 0,30 | 12.900 | 13.100 | 0 | 0,04 |
| GIKL10-PW | +0,015 10,00 | 22,00 | 14,00 -0,12 | 19,05 | 12,90 | 28,00 | M10-LH | 15,00 | 19,00 | 43,00 | 10,50 | 13,00 | 20,00 | 57,00 | 6,50 | 15,00 | 17,00 | 0,30 | 18.000 | 18.500 | 0 | 0,04 |
| GIKFL10-PW | +0,015 10,00 | 22,00 | 14,00 -0,12 | 19,05 | 12,90 | 28,00 | M10x1,25-LH | 15,00 | 19,00 | 43,00 | 10,50 | 13,00 | 20,00 | 57,00 | 6,50 | 15,00 | 17,00 | 0,30 | 18.000 | 18.500 | 0 | 0,04 |
| GIKL12-PW | +0,018 12,00 | 26,00 | 16,00 -0,12 | 22,23 | 15,40 | 32,00 | M12-LH | 17,50 | 22,00 | 50,00 | 12,00 | 13,00 | 22,00 | 66,00 | 6,50 | 17,00 | 19,00 | 0,30 | 24.000 | 20.800 | 0 | 0,04 |
| GIKFL12-PW | +0,018 12,00 | 26,00 | 16,00 -0,12 | 22,23 | 15,40 | 32,00 | M12x1,25-LH | 17,50 | 22,00 | 50,00 | 12,00 | 13,00 | 22,00 | 66,00 | 6,50 | 17,00 | 19,00 | 0,30 | 24.000 | 20.800 | 0 | 0,04 |
| GIKL14-PW | +0,018 14,00 | 28,00 | 19,00 -0,12 | 25,40 | 16,80 | 36,00 | M14-LH | 21,00 | 26,00 | 57,00 | 13,50 | 16,00 | 25,00 | 75,00 | 8,00 | 18,00 | 22,00 | 0,30 | 31.000 | 32.000 | 0 | 0,04 |
| GIKL16-PW | +0,018 16,00 | 32,00 | 21,00 -0,12 | 28,58 | 19,30 | 42,00 | M16-LH | 22,00 | 28,00 | 64,00 | 15,00 | 15,00 | 28,00 | 85,00 | 8,00 | 23,00 | 22,00 | 0,30 | 39.000 | 45.200 | 0 | 0,04 |
| GIKFL16-PW | +0,018 16,00 | 32,00 | 21,00 -0,12 | 28,58 | 19,30 | 42,00 | M16x1,5-LH | 22,00 | 28,00 | 64,00 | 15,00 | 15,00 | 28,00 | 85,00 | 8,00 | 23,00 | 22,00 | 0,30 | 39.000 | 45.200 | 0 | 0,04 |
| GIKL18-PW | +0,018 18,00 | 35,00 | 23,00 -0,12 | 31,75 | 21,80 | 46,00 | M18x1,5-LH | 25,00 | 31,00 | 71,00 | 16,50 | 15,00 | 32,00 | 94,00 | 10,00 | 25,00 | 27,00 | 0,30 | 47.500 | 46.900 | 0 | 0,04 |
| GIKL20-PW | +0,021 20,00 | 40,00 | 25,00 -0,12 | 34,93 | 24,30 | 50,00 | M20x1,5-LH | 27,50 | 35,00 | 77,00 | 18,00 | 14,00 | 33,00 | 102,00 | 10,00 | 26,00 | 30,00 | 0,30 | 57.000 | 45.600 | 0 | 0,04 |
| GIKL22-PW | +0,021 22,00 | 42,00 | 28,00 -0,12 | 38,10 | 25,80 | 54,00 | M22x1,5-LH | 30,00 | 38,00 | 84,00 | 20,00 | 15,00 | 37,00 | 111,00 | 12,00 | 29,00 | 32,00 | 0,30 | 68.000 | 61.100 | 0 | 0,04 |
| GIKL25-PW | +0,021 25,00 | 47,00 | 31,00 -0,12 | 42,85 | 29,50 | 60,00 | M24x2-LH | 33,50 | 42,00 | 94,00 | 22,00 | 15,00 | 42,00 | 124,00 | 12,00 | 32,00 | 36,00 | 0,30 | 85.000 | 72.800 | 0 | 0,04 |
| GIKFL30-PW | +0,021 30,00 | 55,00 | 37,00 -0,12 | 50,80 | 34,80 | 70,00 | M27x2-LH | 40,00 | 50,00 | 110,00 | 25,00 | 17,00 | 51,00 | 145,00 | 15,00 | 37,00 | 41,00 | 0,30 | 114.000 | 95.900 | 0 | 0,04 |
| GIKL30-PW | +0,021 30,00 | 55,00 | 37,00 -0,12 | 50,80 | 34,80 | 70,00 | M30x2-LH | 40,00 | 50,00 | 110,00 | 25,00 | 17,00 | 51,00 | 145,00 | 15,00 | 37,00 | 41,00 | 0,30 | 114.000 | 95.000 | 0 | 0,04 |
Variants of GIKL25-PW (2)
| Designation | Dimension | Performance data | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d | D | B | dK | d1 | d2 | d3 | d4 | d5 | h1 | C1 | ɑ | l3 | l4 | l5 | l7 | W | r1s | Cr | C0r | CNmin | CNmax | |
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ° | mm | mm | mm | mm | mm | mm | N | N | mm | mm | ||
| GIKL25-PW | +0,021 25,00 | 47,00 | 31,00 -0,12 | 42,85 | 29,50 | 60,00 | M24x2-LH | 33,50 | 42,00 | 94,00 | 22,00 | 15,00 | 42,00 | 124,00 | 12,00 | 32,00 | 36,00 | 0,30 | 85.000 | 72.800 | 0 | 0,04 |
| GIKR25-PW | +0,021 25,00 | 47,00 | 31,00 -0,12 | 42,85 | 29,50 | 60,00 | M24x2 | 33,50 | 42,00 | 94,00 | 22,00 | 15,00 | 42,00 | 124,00 | 12,00 | 32,00 | 36,00 | 0,30 | 85.000 | 72.800 | 0 | 0,04 |
Accessories to GIKL25-PW (0)
No more data could be loaded.
Product features for GIKL25-PW (4)
| Properties | Suffix | Description |
|---|---|---|
| Sliding pair | - | Steel / PTFE foil |
| Maintenance | - | Maintenance free |
| Dimensional standards | - | Dimension series K |
| Dimensional standards | - | Main dimensions according to DIN ISO 12240-4 |
Für dieses Produkt ist ein 3D-Model verfügbar
Our 3D models serve as visual support and are created with great care and the information is checked for accuracy. However, no liability can be accepted for any incorrect or incomplete information. The release of step files is reserved exclusively for corporate customers. To request a step file, please use the step file request link.
3D WebGL
Step-file
All statements without guarantee. Please note the following product information