Rod end GAR10-DO
Main dimensions for GAR10-DO
| Designation | Dimension | Remark |
|---|---|---|
| d | 10.00 mm | shaft diameter, tolerance: -0.008 mm |
| D | 19.00 mm | outer diameter, bearing |
| B | 9.00 mm | tolerance: -0.120 mm |
| dK | 16.00 mm | Head circle diameter |
| d1 | 13.20 mm | Outer collar diameter of the inner ring |
| d2 | 29.00 mm | Outer eye diameter |
| d3 | M10 | External thread, right-hand thread |
| h | 48.00 mm | Shaft length, head |
| C1 | 7.00 mm | Width of the rod end |
| ɑ | 12.00 mm | Tilt angle |
| l1 | 26.00 mm | Shaft length external thread thread |
| l2 | 62.50 mm | overall length |
| l7 | 15.00 mm | Distance between bore to thread shaft start |
| r1s | 0.30 mm | min. edge distance |
Performance data for GAR10-DO
| Designation | Dimension | Remark |
|---|---|---|
| Cr | 8,150 N | dynamic load rating, radial |
| C0r | 20,600 N | static load rating, radial (Head load capacity) |
| CNmin | 0.02 mm | minimal radial clearance |
| CNmax | 0.07 mm | maximum radial clearance |
| 0.054 kg | Weight |
Other sizes of GAR10-DO series GARDO (16)
| Designation | Dimension | Performance data | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d | D | B | d1 | d2 | d3 | dk | h | C1 | ɑ | l1 | l2 | l7 | r1s | Cr | C0r | CNmin | CNmax | |
| mm | mm | mm | mm1 | mm2 | 3 | mm | mm | mm1 | ° | mm | mm | mm | mm | N | N | mm | mm | |
| GAR6-DO | 6,00 -0,008 | 14,00 | 6,00 -0,12 | 8,00 | 21,00 | M6 | 10,00 | 36,00 | 4,40 | 13,00 | 18,00 | 46,50 | 12,00 | 0,30 | 3.400 | 6.920 | 0,02 | 0,07 |
| GAR8-DO | 8,00 -0,008 | 16,00 | 8,00 -0,12 | 10,20 | 24,00 | M8 | 13,00 | 42,00 | 6,00 | 15,00 | 22,00 | 54,00 | 14,00 | 0,30 | 5.500 | 12.900 | 0,02 | 0,07 |
| GAR10-DO | 10,00 -0,008 | 19,00 | 9,00 -0,12 | 13,20 | 29,00 | M10 | 16,00 | 48,00 | 7,00 | 12,00 | 26,00 | 62,50 | 15,00 | 0,30 | 8.150 | 20.600 | 0,02 | 0,07 |
| GAR12-DO | 12,00 -0,008 | 22,00 | 10,00 -0,12 | 14,90 | 34,00 | M12 | 18,00 | 54,00 | 8,00 | 11,00 | 28,00 | 71,00 | 18,00 | 0,30 | 10.800 | 30.100 | 0,02 | 0,07 |
| GAR15-DO | 15,00 -0,008 | 26,00 | 12,00 -0,12 | 18,40 | 40,00 | M14 | 22,00 | 63,00 | 10,00 | 8,00 | 34,00 | 83,00 | 20,00 | 0,30 | 17.000 | 41.500 | 0,03 | 0,08 |
| GAR17-DO | 17,00 -0,008 | 30,00 | 14,00 -0,12 | 20,70 | 46,00 | M16 | 25,00 | 69,00 | 11,00 | 10,00 | 36,00 | 92,00 | 23,00 | 0,30 | 21.200 | 56.500 | 0,03 | 0,08 |
| GAR20-DO | 20,00 -0,010 | 35,00 | 16,00 -0,12 | 24,10 | 53,00 | M20x1,5 | 29,00 | 78,00 | 13,00 | 9,00 | 43,00 | 104,50 | 27,00 | 0,30 | 30.000 | 75.600 | 0,03 | 0,08 |
| GAR25-DO | 25,00 -0,010 | 42,00 | 20,00 -0,12 | 29,30 | 64,00 | M24x2 | 35,50 | 94,00 | 17,00 | 7,00 | 53,00 | 126,00 | 32,00 | 0,60 | 48.000 | 88.200 | 0,04 | 0,10 |
| GAR30-DO | 30,00 -0,010 | 47,00 | 22,00 -0,12 | 34,20 | 73,00 | M30x2 | 40,70 | 110,00 | 19,00 | 6,00 | 65,00 | 146,50 | 37,00 | 0,60 | 62.000 | 119.000 | 0,04 | 0,10 |
| GAR35-DO-2RS | 35,00 -0,012 | 55,00 | 25,00 -0,12 | 39,70 | 82,00 | M36x3 | 47,00 | 140,00 | 21,00 | 6,00 | 82,00 | 181,00 | 42,00 | 0,60 | 80.000 | 159.000 | 0,04 | 0,10 |
| GAR40-DO-2RS | 40,00 -0,012 | 62,00 | 28,00 -0,12 | 45,00 | 92,00 | M39x3 | 53,00 | 150,00 | 23,00 | 7,00 | 86,00 | 196,00 | 48,00 | 0,60 | 100.000 | 194.000 | 0,04 | 0,12 |
| GAR45-DO-2RS | 45,00 -0,012 | 68,00 | 32,00 -0,12 | 50,70 | 102,00 | M42x3 | 60,00 | 163,00 | 27,00 | 7,00 | 94,00 | 214,00 | 52,00 | 0,60 | 127.000 | 259.000 | 0,04 | 0,12 |
| GAR50-DO-2RS | 50,00 -0,012 | 75,00 | 35,00 -0,12 | 55,90 | 112,00 | M45x3 | 66,00 | 185,00 | 30,00 | 6,00 | 107,00 | 241,00 | 60,00 | 0,60 | 156.000 | 313.000 | 0,04 | 0,12 |
| GAR60-DO-2RS | 60,00 -0,015 | 90,00 | 44,00 -0,15 | 66,80 | 135,00 | M52x3 | 80,00 | 210,00 | 38,00 | 6,00 | 115,00 | 277,50 | 75,00 | 1,00 | 245.000 | 485.000 | 0,04 | 0,12 |
| GAR70-DO-2RS | 70,00 -0,015 | 105,00 | 49,00 -0,15 | 77,80 | 160,00 | M56x4 | 92,00 | 235,00 | 42,00 | 6,00 | 125,00 | 315,00 | 87,00 | 1,00 | 315.000 | 564.000 | 0,06 | 0,14 |
| GAR80-DO-2RS | 80,00 -0,015 | 120,00 | 55,00 -0,15 | 89,40 | 180,00 | M64x4 | 105,00 | 270,00 | 47,00 | 6,00 | 140,00 | 360,00 | 100,00 | 1,00 | 400.000 | 689.000 | 0,06 | 0,14 |
Variants of GAR10-DO (2)
| Designation | Dimension | Performance data | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d | D | B | d1 | d2 | d3 | dk | h | C1 | ɑ | l1 | l2 | l7 | r1s | Cr | C0r | CNmin | CNmax | |
| mm | mm | mm | mm1 | mm2 | 3 | mm | mm | mm1 | ° | mm | mm | mm | mm | N | N | mm | mm | |
| GAL10-DO | 10,00 -0,008 | 19,00 | 9,00 -0,12 | 13,20 | 29,00 | M10-LH | 16,00 | 48,00 | 7,00 | 12,00 | 26,00 | 62,50 | 15,00 | 0,30 | 8.150 | 20.600 | 0,02 | 0,07 |
| GAR10-DO | 10,00 -0,008 | 19,00 | 9,00 -0,12 | 13,20 | 29,00 | M10 | 16,00 | 48,00 | 7,00 | 12,00 | 26,00 | 62,50 | 15,00 | 0,30 | 8.150 | 20.600 | 0,02 | 0,07 |
Accessories to GAR10-DO (0)
No more data could be loaded.
Product features for GAR10-DO (5)
| Properties | Suffix | Description |
|---|---|---|
| Sliding pair | - | Steel / Steel |
| Maintenance | - | Maintenance required |
| Lubricatable | - | Relubrication not possible |
| Dimensional standards | - | Dimension series E |
| Dimensional standards | - | Main dimensions according to DIN ISO 12240-4 |
Für dieses Produkt ist ein 3D-Model verfügbar
Our 3D models serve as visual support and are created with great care and the information is checked for accuracy. However, no liability can be accepted for any incorrect or incomplete information. The release of step files is reserved exclusively for corporate customers. To request a step file, please use the step file request link.
3D WebGL
Step-file
All statements without guarantee. Please note the following product information