Rod end GIR6-DO (DIV-GIR6-DO)
Main dimensions for GIR6-DO (div-gir6-do)
| Designation | Dimension | Remark |
|---|---|---|
| d | 6.00 mm | shaft diameter, tolerance: -0.008 mm |
| D | 14.00 mm | outer diameter, bearing |
| B | 6.00 mm | tolerance: -0.120 mm |
| dK | 10.00 mm | Head circle diameter |
| d1 | 8.00 mm | Outer collar diameter of the inner ring |
| d2 | 21.00 mm | Outer eye diameter |
| d3 | M6 | Internal thread, right-hand thread |
| d4 | 10.00 mm | Shaft diameter shoulder |
| d5 | 13.00 mm | Shaft diameter shoulder |
| h1 | 30.00 mm | Shaft length, head |
| C1 | 4.40 mm | Width of the rod end |
| ɑ | 13.00 mm | Tilt angle |
| l3 | 11.00 mm | Thread length |
| l4 | 40.50 mm | overall length |
| l5 | 5.00 mm | waistband length of rod end |
| l7 | 12.00 mm | Distance between bore to thread shaft start |
| W | 11.00 mm | width of wrench |
| r1s | 0.30 mm | min. edge distance |
Performance data for GIR6-DO (div-gir6-do)
We cannot provide any performance data for alternative makes.
| Designation | Dimension | Remark |
|---|---|---|
| CNmin | 0.02 mm | minimal radial clearance |
| CNmax | 0.07 mm | maximum radial clearance |
| 0.022 kg | Weight |
Other sizes of GIR6-DO (div-gir6-do) series GIRDO (16)
| Designation | Dimension | Performance data | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d | D | B | dK | d1 | d2 | d3 | d4 | d5 | h1 | C1 | ɑ | l3 | l4 | l5 | l7 | W | r1s | Cr | C0r | CNmin | CNmax | |
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ° | mm | mm | mm | mm | mm | mm | N | N | mm | mm | ||
| GIR6-DO | 6,00 -0,008 | 14,00 | 6,00 -0,12 | 10,00 | 8,00 | 21,00 | M6 | 10,00 | 13,00 | 30,00 | 4,40 | 13,00 | 11,00 | 40,50 | 5,00 | 12,00 | 11,00 | 0,30 | - | - | 0,02 | 0,07 |
| GIR8-DO | 8,00 -0,008 | 16,00 | 8,00 -0,12 | 13,00 | 10,20 | 24,00 | M8 | 12,50 | 16,00 | 36,00 | 6,00 | 15,00 | 15,00 | 48,00 | 5,00 | 14,00 | 14,00 | 0,30 | - | - | 0,02 | 0,07 |
| GIR10-DO | 10,00 -0,008 | 19,00 | 9,00 -0,12 | 16,00 | 13,20 | 29,00 | M10 | 15,00 | 19,00 | 43,00 | 7,00 | 12,00 | 20,00 | 57,50 | 6,50 | 15,00 | 17,00 | 0,30 | - | - | 0,02 | 0,07 |
| GIR12-DO | 12,00 -0,008 | 22,00 | 10,00 -0,12 | 18,00 | 14,90 | 34,00 | M12 | 17,50 | 22,00 | 50,00 | 8,00 | 11,00 | 23,00 | 67,00 | 6,50 | 18,00 | 19,00 | 0,30 | - | - | 0,02 | 0,07 |
| GIR15-DO | 15,00 -0,008 | 26,00 | 12,00 -0,12 | 22,00 | 18,40 | 40,00 | M14 | 21,00 | 26,00 | 61,00 | 10,00 | 8,00 | 30,00 | 81,00 | 8,00 | 20,00 | 22,00 | 0,30 | - | - | 0,03 | 0,08 |
| GIR17-DO | 17,00 -0,008 | 30,00 | 14,00 -0,12 | 25,00 | 20,70 | 46,00 | M16 | 24,00 | 30,00 | 67,00 | 11,00 | 10,00 | 34,00 | 90,00 | 10,00 | 23,00 | 27,00 | 0,30 | - | - | 0,03 | 0,08 |
| GIR20-DO | 20,00 -0,010 | 35,00 | 16,00 -0,12 | 29,00 | 24,10 | 53,00 | M20x1,5 | 27,50 | 35,00 | 77,00 | 13,00 | 9,00 | 40,00 | 103,50 | 10,00 | 27,00 | 32,00 | 0,30 | - | - | 0,03 | 0,08 |
| GIR25-DO | 25,00 -0,010 | 42,00 | 20,00 -0,12 | 35,50 | 29,30 | 64,00 | M24x2 | 33,50 | 42,00 | 94,00 | 17,00 | 7,00 | 48,00 | 126,00 | 12,00 | 32,00 | 36,00 | 0,60 | - | - | 0,04 | 0,10 |
| GIR30-DO | 30,00 -0,010 | 47,00 | 22,00 -0,12 | 40,70 | 34,20 | 73,00 | M30x2 | 40,00 | 50,00 | 110,00 | 19,00 | 6,00 | 56,00 | 146,50 | 15,00 | 37,00 | 41,00 | 0,60 | - | - | 0,04 | 0,10 |
| GIR35-DO-2RS | 35,00 -0,012 | 55,00 | 25,00 -0,12 | 47,00 | 39,70 | 82,00 | M36x3 | 47,00 | 58,00 | 125,00 | 21,00 | 6,00 | 60,00 | 166,00 | 15,00 | 42,00 | 50,00 | 0,60 | - | - | 0,04 | 0,10 |
| GIR40-DO-2RS | 40,00 -0,012 | 62,00 | 28,00 -0,12 | 53,00 | 45,00 | 92,00 | M39x3 | 52,00 | 65,00 | 142,00 | 23,00 | 7,00 | 65,00 | 188,00 | 18,00 | 48,00 | 55,00 | 0,60 | - | - | 0,04 | 0,12 |
| GIR45-DO-2RS | 45,00 -0,012 | 68,00 | 32,00 -0,12 | 60,00 | 50,70 | 102,00 | M42x3 | 58,00 | 70,00 | 145,00 | 27,00 | 7,00 | 65,00 | 196,00 | 20,00 | 52,00 | 60,00 | 0,60 | - | - | 0,04 | 0,12 |
| GIR50-DO-2RS | 50,00 -0,012 | 75,00 | 35,00 -0,12 | 66,00 | 55,90 | 112,00 | M45x3 | 62,00 | 75,00 | 160,00 | 30,00 | 6,00 | 68,00 | 216,00 | 20,00 | 60,00 | 65,00 | 0,60 | - | - | 0,04 | 0,12 |
| GIR60-DO-2RS | 60,00 -0,015 | 90,00 | 44,00 -0,15 | 80,00 | 66,80 | 135,00 | M52x3 | 70,00 | 88,00 | 175,00 | 38,00 | 6,00 | 70,00 | 242,50 | 20,00 | 75,00 | 75,00 | 1,00 | - | - | 0,04 | 0,12 |
| GIR70-DO-2RS | 70,00 -0,015 | 105,00 | 49,00 -0,15 | 92,00 | 77,80 | 160,00 | M56x4 | 80,00 | 98,00 | 200,00 | 42,00 | 6,00 | 80,00 | 280,00 | 20,00 | 87,00 | 85,00 | 1,00 | - | - | 0,06 | 0,14 |
| GIR80-DO-2RS | 80,00 -0,015 | 120,00 | 55,00 -0,15 | 105,00 | 89,40 | 180,00 | M64x4 | 95,00 | 110,00 | 230,00 | 47,00 | 6,00 | 85,00 | 320,00 | 25,00 | 100,00 | 100,00 | 1,00 | - | - | 0,06 | 0,14 |
Variants of GIR6-DO (div-gir6-do) (2)
| Designation | Dimension | Performance data | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d | D | B | dK | d1 | d2 | d3 | d4 | d5 | h1 | C1 | ɑ | l3 | l4 | l5 | l7 | W | r1s | Cr | C0r | CNmin | CNmax | |
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ° | mm | mm | mm | mm | mm | mm | N | N | mm | mm | ||
| GIL6-DO | 6,00 -0,008 | 14,00 | 6,00 -0,12 | 10,00 | 8,00 | 21,00 | M6-LH | 10,00 | 13,00 | 30,00 | 4,40 | 13,00 | 11,00 | 40,50 | 5,00 | 12,00 | 11,00 | 0,30 | - | - | 0,02 | 0,07 |
| GIR6-DO | 6,00 -0,008 | 14,00 | 6,00 -0,12 | 10,00 | 8,00 | 21,00 | M6 | 10,00 | 13,00 | 30,00 | 4,40 | 13,00 | 11,00 | 40,50 | 5,00 | 12,00 | 11,00 | 0,30 | - | - | 0,02 | 0,07 |
Accessories to GIR6-DO (div-gir6-do) (0)
No more data could be loaded.
Product features for GIR6-DO (div-gir6-do) (5)
| Properties | Suffix | Description |
|---|---|---|
| Sliding pair | - | Steel / Steel |
| Maintenance | - | Maintenance required |
| Lubricatable | - | Relubrication not possible |
| Dimensional standards | - | Dimension series E |
| Dimensional standards | - | Main dimensions according to DIN ISO 12240-4 |
Für dieses Produkt ist ein 3D-Model verfügbar
Our 3D models serve as visual support and are created with great care and the information is checked for accuracy. However, no liability can be accepted for any incorrect or incomplete information. The release of step files is reserved exclusively for corporate customers. To request a step file, please use the step file request link.
3D WebGL
Step-file
All statements without guarantee. Please note the following product information